Model-based control for chemical-mechanical planarization (CMP)

de Roover, D.; Emami-Naeini, A.; Ebert, J.L., Model-based control for chemical-mechanical planarization (CMP), Proceedings of the 2004 American Control Conference, Volume 5, 30 June-2 July 2004, pp. 3922-3929, 2004.

The research described in this tutorial paper involves an effort for physical modeling and model-based sensing and control of CMP systems.  A dynamic model of a rotational CMP process is developed, as well as simulation software. This dynamic model is used for feedback control
design based on  in-situ thickness measurements, as well as run-to-run control using in-line metrology. Simulation results of open-loop, feedback control, and combined feedback and run-to-run control are presented and compared. A multivariable LQ (linear quadratic) feedback controller was designed and showed improvement of Within-Wafer-Non-Uniformity (WIWNU) at the end of a run in simulation over
existing open-loop control of a CMP process.  It also showed the possibility of using feedback control as a means of end-pointing the CMP process.  Furthermore, a run-to-run (R2R) controller was designed and simulated. Additional improvement of WIWNU and tracking a desired average wafer thickness was obtained, showing the merits of a combined feedback / run-to-run control process.

Download publication (application/pdf, 632.1 kB)